|
|
|
TIANJIN HENGLIDA CONSTRUCTION MACHINERY IMPORT AND EXPORT CO., LTD.
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
CLG856II, CLG856 |
WHEEL LOADER
Model No.: CLG856II
MAIN FEATURES:
1. ROPS/FOPS cab with a panoramic visibility equipped with electronic surveillance system and adjustable steering wheel.
2. Two taper roll bearing of each connection can effectively reduce loads from horizontal and vertical. Center-point articulation possesses small turning radius and good pass capability.
3. CUMMINS engine with low noise, low emission and high efficiency meets EPA tier 2. Integrated engine cover can be opened backward.
4. Single lever control the bucket to lift or tilt.
5. ZF transmission with KD function.
6. ZF axles with limited slip differential locks.
7. Full hydraulic wet-disc brake system.
8. CE certificate has been obtained.
MAIN PARAMETERS:
ENGINE:
Model: CUMMINS QSB
Type: 4 cycle, turbocharged, electronic controlled diesel engine
Rated power: 160 kw (215 HP)
Peak torque: 938 Nm / 1500 rpm
Displacement: 5.9 L
Cylinders-bore x stroke: 6-102 x 120 mm
TRANSMISSION:
Model: ZF 4WG200
Type of transmission: counter shaft-type power shift, semi-automatic electrical hydraulic shifting control
Type of converter: single-stage, single-phase, three elements torque converter
TRAVEL SPEED:
Forward: I: 0-7 km/h; II: 0-12 km/h; III: 0-23 km/h; IV: 0-37 km/h;
Reverse: I: 0-7 km/h; II: 0-12 km/h; III: 0-23 km/h;
STEERING SYSTEM:
Type: articulated frame, full hydraulic power with flow amplified system, full-flow filtering
Steering angle, each direction: 38 degree
Setting pressure: 16 Mpa
Flow: 138.6 L/min / 2200 rpm
AXLES:
Model: ZF AP400 series
Type: self-locking differentials and wet multi-disc brakes
BRAKE SYSTEM:
Type of brake system: full hydraulic wet-disc braking
Service brake: all wheels wet multi-disc brakes
Parking brake: shoe-type brake, operator applies electronic-control
Emergent brake: using parking brake, the brake will automatically/manually apply. Equipped with braking low-pressure warning and flameout emergency braking warning.
HYDRAULIC SYSTEM:
Relief valve setting: 20 Mpa
Hydraulic cycle time, rated load in bucket (in second): raise: 6.3; dump: 1.5; lower (empty, float down): 3.5; total: 11.3
CAPACITY:
Fuel tank: 280 L
Hydraulic tank: 210 L
TIRES:
Type: tubeless 23.5 x 25
OVERALL DATA:
Operating weight: 16800 kg
Bucket capacity: 3 cubic meter
Rated load: 5000 kg
Traction force: 138 kN
Gradient: 30 degree
Breakout force: 158 kN
Static tipping load (full 38 degree turn): 105 kN
Ground clearance: 431 mm
Length from centerline of front axle: 1625 mm
Wheelbase: 3250 mm
Max. rollback at full height: 60.5 degree
Bucket dump at full height: 45 degree
Dump reach: 1035 mm
Max. overall height: 5243 mm
Hinge pin height at full lift: 4154 mm
Dump height: 3100 mm
Max. rollback at ground: 45 degree
Hinge pin height at carry position: 331 mm
Max. digging depth: 61 mm
Width over tires: 2750 mm
Tread width: 2150 mm
Turning radius outside tires: 6095 mm
Max. steering angle (each side): 38 degree
Bucket width: 2976 mm
Turning radius outside bucket: 6775 mm
OVERALL DIMENSIONS:
Overall length: 8060 mm
Overall width: 2976 mm
Overall height: 3467 mm
STANDARD EQUIPMENT:
CUMMINS QSB engine; ZF 4WG200 transmission; PARKER distributing valve; PARKER pilot control valve; PARKER working pump; automatic bucket return-to-dig; ROPS / FOPS cab; general purpose bucket; centralized automatic lubricating system; pilot control; ZF AP400 series axles; PARKER steering control valve; PARKER multi-purpose valve; REXROTH brake control valve; automatic boom height kickout control; air conditioner; backup alarm.
OPTIONAL EQUIPMENT:
Side dump; log fork; rock bucket; ore bucket; wheel loader scale; 3.3 cubic meter and 4 cubic meter light material bucket.
WHEEL LOADER
Model No.: CLG856
MAIN FEATURES:
1. ROPS/FOPS cab with a panoramic visibility equipped with electronic surveillance system and adjustable steering wheel.
2. Two taper roll bearing of each connection can effectively reduce loads from horizontal and vertical. Center-point articulation possesses small turning radius and good pass capability.
3. CUMMINS engine with low noise, low emission and high efficiency. Integrated engine cover can be opened backward.
4. CE certificate has been obtained.
MAIN PARAMETERS:
ENGINE:
Model: CUMMINS 6CT8.3-C215
Type: in line, water-cooled, 4 cycle, direct injection, diesel engine
Rated power: 160 kw (215 HP) / 2200 rpm
Peak torque: 872 Nm / 1500 rpm
Displacement: 8.3 L
Cylinders-bore x stroke: 6-114 x 135 mm
TRANSMISSION:
Model: ZF 4WG200
Type of transmission: counter shaft-type power shift, semi-automatic electrical hydraulic shifting control
Type of converter: single-stage, single-phase, three elements torque converter
TRAVEL SPEED:
Forward: I: 0-6.5 km/h; II: 0-11.5 km/h; III: 0-23 km/h; IV: 0-37 km/h;
Reverse: I: 0-6.5 km/h; II: 0-11.5 km/h; III: 0-23 km/h;
STEERING SYSTEM:
Type: articulated frame, full hydraulic power with flow amplified system, full-flow filtering
Steering angle, each direction: 38 degree
Setting pressure: 16 Mpa
Flow: 138.6 L/min / 2200 rpm
AXLES:
Model: ZF AP400 series
Type: self-locking differentials and wet multi-disc brakes
BRAKE SYSTEM:
Type of brake system: full hydraulic wet-disc braking
Service brake: all wheels wet multi-disc brakes
Parking brake: shoe-type brake, operator applies electronic-control
Emergent brake: using parking brake, the brake will automatically/manually apply. Equipped with braking low-pressure warning.
HYDRAULIC SYSTEM:
Relief valve setting: 21 Mpa
Hydraulic cycle time, rated load in bucket (in second): raise: 6.3; dump: 1.5; lower (empty, float down): 3.4; total: 11.2
Lift cylinder-bore x stroke: 160 x 785 mm
Tilt cylinder-bore x stroke: 180 x 540 mm
CAPACITY:
Coolant: 60 L
Fuel tank: 280 L
Crankcase: 24 L
Torque converter / transmission: 40 L
Differentials and final drives: front: 34 L; rear: 34 L
Hydraulic tank: 210 L
TIRES:
Type: 23.5-25-16PR
LIFT ARM PINS:
Sealed pins in lift arms and bucket hinge points for longer pin and bushing life, lower maintenance costs.
BUCKET CONTROLS:
Lift circuit: pilot system, operated by manual; positions: raise, hold, lower and float
Tilt circuit: pilot system, operated by manua; positions: tilt, back, hold and dump
OVERALL DATA:
Operating weight: 16800 kg
Bucket capacity: 3 cubic meter
Rated load: 5000 kg
Traction force: 138 kN
Gradient: 30 degree
Breakout force: 158 kN
Static tipping load (full 38 degree turn): 105 kN
Ground clearance: 431 mm
Length from centerline of front axle: 1625 mm
Wheelbase: 3250 mm
Max. rollback at full height: 60.5 degree
Bucket dump at full height: 45 degree
Dump reach: 1035 mm
Max. overall height: 5243 mm
Hinge pin height at full lift: 4154 mm
Dump height: 3100 mm
Max. rollback at ground: 45 degree
Hinge pin height at carry position: 331 mm
Max. digging depth: 61 mm
Width over tires: 2750 mm
Tread width: 2150 mm
Turning radius outside tires: 6095 mm
Max. steering angle (each side): 38 degree
Bucket width: 2976 mm
Turning radius outside bucket: 6775 mm
OVERALL DIMENSIONS:
Overall length: 8060 mm
Overall width: 2976 mm
Overall height: 3467 mm
STANDARD EQUIPMENT:
CUMMINS 6CT8.3-C215 engine; ZF 4WG200 transmission; automatic bucket leveler; ROPS/FOPS cab; general bucket; pilot control; ZF AP400 series axles; lift kick-out system; air conditioner; back-up alarm.
OPTIONAL EQUIPMENT:
Side dump; log fork; rock bucket; ore bucket; wheel loader scale; 3.3 cubic meter and 4 cubic meter light material bucket; centralized automatic lubricating system.
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page